This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

XR2206 Device Model Problem

Other Parts Discussed in Thread: TINA-TI

I am writing to point out a device problem in TINA-TI.  The XR2206 model you are using does not include the symmetry adjust inputs

on pins 15 and 16.  The model indicates these pins are N.C. (not connected).  I realize this part is obsolete and is not really

a TI part.  I also realize that Designsoft is the actual program creator.  Any help you could give would be greatly appreciated.

Thank you.

jsuttles@ewt-consultants.com