• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 605 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1299EEGFE-PDK: Connect ADS1299EEGFE-PDK with Arduino

Danilo A.
Mastermind 26085 points
Part Number: ADS1299EEGFE-PDK

Hi Team,

Our customer would like to use ADS1299EEGFE-PDK together with Arduino. He disconnected the ADS1299EEGFE-PDK from the MMB0 board and connect it to Arduino using jumper wires as shown in the picture below.

Aside from providing power to 5V, 3.3V, ground thru J4 and SPI port, what are the pins that he need to configure to make it work with Arduino? 

Regards,

Danilo

  • 0
    TI__Genius 11550 points

    Hi Danilo,

    Thanks for the post. 

    All the digital signals in addition to the SPI-bus for the device can be configured on the ADS1299EEGFE-PDK board by jumpers or control externally by the Arduino. Please refer to the user guide or datasheet for reference.

    Thanks

    -TC