Dear sir,
Request you to help me with the following queries:
I am Programming the IC from FPGA.
1.no oversampling, stby PIN high, range PIN high, reset controlling from Fpga
2.i want to read the data of 8 channels from douta in serial mode of operation and am following the data sheet for serial mode connections.(par/sel=1,db15=0).
if i want to read all channels data from douta i am issuing 112 sclk cycles to read from ic,but can you help me with the CONVSTA,CONVSTB signals how to handle them in serial mode(whether tied together or left individually)
to read the data from douta(8 channels)
Also request you to help me the reading flow for above settings and also consta,convstb timing for serial mode