Hello,
I'm buying ADS125H02EVM and doing mechanical design to mount this part. So please share the drawing or the 3d-file of it.
Thank you.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
I'm buying ADS125H02EVM and doing mechanical design to mount this part. So please share the drawing or the 3d-file of it.
Thank you.
Hi there Vu!
Can you tell us what you mean by mounting our ADS125H02EVM into your design? Is this a one time thing or do you plan to mass produce your product with our EVM inside the equipment?
Hi Vu,
OK, that should be fine, our corporate policy restricts our EVM's from being used as a direct assembly in commercial products. The physical PCB is 5 inches long and 3 inches wide. Unfortunately there are no true 'mounting holes' on the PCB so once you have the hardware in hand you'll have to determine the best way to get it into your setup. I do not have a 3-D model of the PCB, so hopefully this detail is enough to get you started: