• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 120 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC3154: Clocks input termination

David Wende
Intellectual 620 points
Part Number: DAC3154

I am trying to understand from the data sheet how to best drive both DACCLK and DATACLK.

DATACLK: Should I drive it LVDS AC or DC coupled? I understand that the device has internal 100ohm termination.

DACCLK: Should be driven LVPECL. But is there any internal termination? Again, DC or AC coupled?

Thanks

David

  • +1
    TI__Guru* 91947 points

    David,

    Drive DATACLK as LVDS. No termination resistor is needed as the part has an internal 100 Ohm resistor across DATACLKP and DATACLKN.

    Drive DACCLK as AC coupled LVPECL and use an external 100 Ohm resistor. Place this resistor across the DACCLKP and DACCLKN pins and as close as possible to the DAC.

    Regards,

    Jim