Hello team,
Can you show me the placement of Rin? My customer is calculating gain error.
Best regards,
Shotaro
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello team,
Can you show me the placement of Rin? My customer is calculating gain error.
Best regards,
Shotaro
Hi Shotaro,
Rin would be as shown in Figure 55, essentially parallel to R3. The gain error is calculated using equation 5 (page 30) in this configuration. Are you using the AMC1303M2510 for a voltage or current monitoring application?
Hi Tom-san,
Thank you for supporting.
Is the placement of Rin corresponding to the below figure?
Also in my understanding, AMC1303M2510 is used for voltage monitoring. I am checking again with the customer.
Best regards,
Shotaro
Hi Shotaro,
Yes, but now you have it twice, Figure 55 represents Rin, there is no need to add it a second time.