Hello,
Is it possible to receive the design files of AFE4300EVM-PDK for the CAD program that it was designed in? I have seen the schematic in the documentation but it is a bit hard to read due to multiple netlabels.
Best regards
Blazej
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
Is it possible to receive the design files of AFE4300EVM-PDK for the CAD program that it was designed in? I have seen the schematic in the documentation but it is a bit hard to read due to multiple netlabels.
Best regards
Blazej
Hi Blazej,
This device is under NDA so we'll have to discuss it via email. Just sent you a message.
Kind regards,
Nick Z
Hello Blazej,
We solved this request via email. For further support, please contact my team or I via our email thread.
I'll be closing out this E2E thread since we have solved the original post; to reopen this thread, please reply to this post.
Kind regards,
Nick Z