Hi, we are using DAC63204EVM
we wonder if you can help with python script for it?
we want to do some automation tests and we cant do it with the GUI
we want to sweep the V_DAC _out in some conditions and want to write to DAC_X_margin_high,
DAC_X_margin_low and change the slew rate.
Hi Ariel,
First confirm if you are able to launch the python macro recording page:
I recommend you launch the page and record scripts of how you would like to setup the device. Once you have some example scripts, you can modify them to allow for loops and other common tasks.
Please refer to this e2e as well for guidance on the python scripting tool in the GUI: https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/965822/dac60096evm-scripting-window-issue
Otherwise, you have two other options for interfacing with the DAC63204EVM:
1. Visit the website for the FT4222HQ controller that is on the EVM and use their cpp examples to develop code to sweep the DAC voltage. There are also python drivers available on the web, but I am less familiar with those. Or,
2. Use an external I2C or SPI host controller to the corresponding pins on the EVM and control the DAC registers with that controller.
Best,
Katlynne Jones
Hi,
I have an issue with launching the scripting windows. even though python 2.7 is installed on my PC, the GUI doesn't recognize it.
I tried to RST my PC and still, the same issue.
what should I do?
