Other Parts Discussed in Thread: LMX2541, , LMK04828
Hi forum, we are planning to use the ADC12J4000 with a 4GHz clock from a LMX2541, as this LMX is available for purchase.
As we are integrating the ADC samples to raise very weak signals from the noise floor, what is the recommended clock solution/filtering?
We are currently looking at using a clock buffer (RF amp), band pass filter(BFCN-4100+) and balun (BD3150N50100AHF) to have sinusoidal clock.
The clock source for the LMX is a LMK04828.
Best regards,
Eirik Bjerkaker