Other Parts Discussed in Thread: ADC3644, ADC3564
Hi,
I am looking at the ADC364xEVM_RevF(004)_Sch_2022-04-01.pdf schematic sheet for the ADC3644 and am confused by the use of 'X' through components. For example, does an X through a resistor mean to remove that resistor or replace it with a short? Same for inductors and capacitors.
Additionally, I only want to use 1 of the two ADC channels. I believe I can leave the digital outputs (DB0-DB6) floating since they are CMOS outputs, but I was wondering what to do with the B channel analog inputs (BIN_P and BIN_N)? Can they just be tied to ground or VCM?
Thanks