• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 149 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPL0102-100: TPL0102EVM program

switch
Expert 2385 points
Part Number: TPL0102-100
Other Parts Discussed in Thread: TPL0102EVM

Hi Ti team，

Can you provide the TPL0102EVM program?

  • 0
    TI__Mastermind 18546 points

    Hi,

    Unfortunately there is no designated controller for that board. I suspect that the header ( J14) was added as a generic interface, to be connected to any controller the user prefers, such as an MCU or data-generator. This device has a simple I2C interface, which should pair up with any I2C source.

    We are looking to refresh these EVMs for better usability, but that will likely be a few more months out.

    Regards,

    AK