Hello All,
I'm working with DAC8760 in newly designed Hardware board. I'm trying to reset the chip by writing 0x560001 and configuring control register to 10v range
0x553001. I was using same steps as AD5422 chip's register programming as I couldn't find programming steps anywhere in DAC8760 data sheet.
I was trying to read back the wrote values data register by writing 0x200001 there was no response from the chip, Also Output stays at 0v
but I was able to read the response of Control register and Configuration register.
I wrote 0x553001 and read back 0x3001 by writing command 0x020002.
I wrote 0x570007 and read back 0x07 by writing command 0x02000B.
Even I could able to read the status register value by writing 0x020000 and I got 0x00.
Do I need to issue any additional command to read configuration register?
Please find the analyzer snips.
Thanks,
Naveen