TLC7528: VDD=3.3V

Yuta Nishie

Part Number: TLC7528

Hi,

Can I use the TLC7528 with VDD=3.3 V?
I couldn't judge from the data sheet, so it would be helpful if you could tell me.

If not, could you tell me which device has the same specs as the AD5428 that can operate at VDD=3.3 V?

Best Regards,

Nishie

over 1 year ago

+1 Katlynne Jones over 1 year ago

TI__Mastermind 29258 points

Hi Nishie-san,

It doesn't look like the TLC7528 supports 3.3V VDD, and I'm not seeing another similar parallel interface, MDAC that supports 3.3V VDD. Are any of these requirements flexible? Do you require the parallel interface?

Best,

Katlynne Jones

0 Yuta Nishie over 1 year ago in reply to Katlynne Jones

Genius 3280 points

Hi Katlynne-san,

Thank you for your reply.

I understood that it cannot be used at 3.3 V.
This thread is OK with Close now that it is resolved.

Best Regards,

Nishie

Data converters

Data converters forum

TLC7528: VDD=3.3V