ADC12D1000: Can we get evaluation board

Ryuuichi machida

Part Number: ADC12D1000
Other Parts Discussed in Thread: ADC12D1600

Hello,

Let me clarify about below.

* According to following URL, it seems that user can choose one of three devices(ADC12D1000, 1600, 1800).
https://www.ti.com/jp/lit/ug/snau018/snau018.pdf

Is my understanding correct ?
If yes, how can we point out target device ? (Ex, I need ADC12D1000, then is there any form which I need to write target device which is implemented on EVM.)

Best Regards,

over 1 year ago

0 Luke Allen over 1 year ago

TI__Prodigy 230 points

Hello,

That is correct, this EVM can be used to evaluate all three of these devices. These devices are pin to pin compatible but have different max sample rates. Therefore, the ADC12D1000 can be evaluated by providing the EVM with an external 1 GHz sample clock.

Best,

Luke Allen

0 Ryuuichi machida over 1 year ago in reply to Luke Allen

Guru 11695 points

Hello Luke-san,

Thank you for your reply.
So, how can we point out ADC12D1000 for ADC12D1X00RB ?
If we order, all of above three will be included from the begining ?

Best Regards,

+1 Luke Allen over 1 year ago in reply to Ryuuichi machida

TI__Prodigy 230 points

Hello Machida-san,

The ADC12D1000 and ADC12D1600 devices are identical, except for the max sample frequency. The max sample frequency for the ADC12D1000 is 1 GHz, while the max sample frequency for the ADC12D1600 is 1.6 GHz. Therefore, to evaluate the ADC12D1000 you can order the ADC12D1600 EVM and provide an external sample clock up to 1 GHz. See the screenshot below:

Best,

Luke Allen

0 Ryuuichi machida over 1 year ago in reply to Luke Allen

Guru 11695 points

Hello,

I see, understood.

BR,

Data converters

Data converters forum

ADC12D1000: Can we get evaluation board