The data capture board TSW17J57EVM features a 10Mhz clock option as stated in the user's guide (SLWU092A-pg2).
What I see in the schematics is that the TSW17J57EVM is provided with Y2 as a 100Mhz oscillator going to bank 3D from the Arria 10 while J17 is also connected to bank 3D. I was expecting to have the10Mhz at J17 however no clock available here.
How to enable or implement this 10Mhz option? It would be nice to have this at J17.
Thanks in advanced,
Patrick