• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 45 subscribers
  • Views 203 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS131E08: How to test sampling rate and SNR？

Owen Yan
Intellectual 2630 points
Part Number: ADS131E08

Hi team,

My customer want to reproduce sampling rate and SNR testing from datasheet, could you please kindly help list the testing methods, equipment and steps? They want to co-work with 3rd party to reproduce the testing and submit the report to SGCC to get qualification. Thansk.

B R,

Owen

  • 0
    TI__Mastermind 45085 points

    Hi Owen,

    To check data rate, they have to program DR[2:0] in CONFIG1 register for the data rate they want to check, e.g. written 00 to DR[2:0] in CONFIG1 register for the highest data rate (64ksps/16-bit word size), then they can check the duration time of /DRDY output from the ADC, it should be around 15.625us for 64ksps data rate.

    The easy way to check SNR is to use a pure sinewave signal and then do FFT for the code from the ADC.

    BR,

    Dale