This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC38J82: Need further response on DAC38J82 and TI JESD IP

Part Number: DAC38J82
Other Parts Discussed in Thread: LMK04828,

Tool/software:

Hi Ti Experts,

 

We have been working on DAC38J82 device and struggling with the JESD interface for quite a few months. We designed our own board with Xilinx K7 FPGA and DAC38J82 with LMK04828 clocking.

We tried  TI204C-IP, the setup seemed work fine but actually no signal came out from hardware. My engineer asked this question in a separate thread(e2e.ti.com/.../5307802 ), but did not get any further response several weeks ago.  

Because of the project schedule, we can NOT always keep waiting, can anybody look into above thread and help? If TI experts don’t have any ideas either, we may have to switch to Analog PN.

Thanks in advance,

Terry

  • Hi Terry,

    I am looking at the issue today. If this is to happen again, please just post onto the original thread which will send an notification to everyone participating in that thread.

    Thanks, Chase