Question on the TLV2556

ABE OMRAN

Other Parts Discussed in Thread: TLV2556, TLC2578

I would like to use the TLV2556 to sample analog inputs in the range from -4.096V to +4.096V (or at least -2.048V to +2.048V). Can this be done? If so, can someone provide a schematic?

Thanks a lot.

Abe.

over 11 years ago

0 Tom Hendrick over 11 years ago

TI__Guru**** 172816 points

Hi Abe!

Welcome to the E2E Community! The TLC2556 cannot accept negative inputs directly, you'd have to scale the input and level shift to get your signals within the 0-Vref range of this ADC. Do you need all eleven channels? We might have something else that you can use (the TLC2578 perhaps?) if you can get away with only eight inputs.

0 ABE OMRAN over 11 years ago in reply to Tom Hendrick

Prodigy 20 points

Thanks tor the info Tom. I think I better scale down.

Data converters

Data converters forum

Question on the TLV2556