• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 513 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC12D1600RB: FPGA files and schematic

Richard Katz
Intellectual 290 points

Hi,

I just received the ADC1xDxxxx(RF)RB Gigasample Reference Board.  It says "Copyright 2013" and "PCB REV B."  I have the 1.6 GSPS ADC.

I've downloaded the support packages that has schematics and the Xilinx project and .bit file.  But the names on the schematic do not seem to match up with the names silkscreened onto the board.  Some of the speed settings in the Xilinx project (.ucf file, DCM modules) do not appear to match the 1.6 GSPS device.  Going down the directory tree, the titles change between different speeds.

So, I would like to make sure that I have the correct schematic and Xilinx FPGA files, to eliminate any confusion.  The board powered up OK and runs with the software.  I did not receive a CD with the board, I wrote in earlier, I downloaded another set of files which also do not appear to match, so I thought I'd stop and ask for help.

Thanks,

Rich Katz