• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 291 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC10D1500 balun board

Dongjin Jeong
Prodigy 120 points

Hi, Manager.

What must use balun board in order to use this board?

I'm using the  'ADC Wide Band Balun Board'.

I want to measure low frequency. But this balun board has '4.5MHz ~ 3GHz' range.

If you have another information about balun board, please help me.

Please reply. Thanks

  • 0
    TI__Mastermind 20541 points
    Hi Dongjin,

    As I mentioned in previous e2e post if you want to measure low frequency signal (100Hz) you cannot use the balun. You will have to use single-ended to differential amplifier which is DC coupled and is set to common mode voltage requirements of the ADC.

    Regards,
    Neeraj Gill
    HSCC