This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS8332 to NI myRIO 1900

Other Parts Discussed in Thread: ADS8332

Hello. I have an ADS8332 SAR ADC which I would like to interface with NI myRIO1900 programmed with LabVIEW using SPI. This is an attempt to increase the number of analog pins on myRIO. Could somebody please guide me as to how to go about it ? I'm having trouble understanding the functions of these pins clearly and how exaclty will I use them. 


Thanks in advance :) 

  • Hello Deepen,

    My recommendation is that you read section 8.4 of the ADS8332 datasheet. This section contains thorough and very well written description of the !RESET, !CONVST, EOC/!INT/CDI, SCLK, FC/!CS, SDI pins.

    Once you have read this, section please post specific questions and include any pertinent oscilloscope captures of your signals so that we better help you in your endeavors.

    Hope this helps.

    Best regards,