• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 447 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC081S021: CS not going low

Vani Aithal
Prodigy 50 points
Part Number: ADC081S021

Hi,

I am interfacing TMS570LS014 with ADC081S021 via MIBSPI3 of a 100 PZ. Master sends CS low at the start. However I am not seeing the CS going low, CLK is present.

All settings seems to be correct. Anything to be taken care of here specially? 

Thanks

 Vani

  • 0
    TI__Mastermind 21685 points
    Vani,
    ADC081S021 works as a slave SPI device. And it requires a master SPI controller to drive chip select CS and generate clock. So CS should be generated and controlled by the MCU TMC570. Please check TMC570 SPI settings. If possible, please upload a schematic of ADC081S021 connection to the MCU.
    Thanks,
    Vishy