ADS42JB49: ADJCNT,ADJDIR,BID,CF,CS,DID,F,HD,L,LID,M,N,M',PHADJ,S parameters

F.N

Part Number: ADS42JB49

Hi team,

My customer wants to know whether ADJCNT,ADJDIR,BID,CF,CS,DID,F,HD,L,LID,M,N,M',PHADJ,S
parameters can be set. We couldn't find these registers in the datasheet.

Please let me know.

Best regards,
Fumio Nakano

over 7 years ago

0 jim s over 7 years ago

TI__Guru* 91947 points

Fumio,

Several of these are set by existing registers such as subclass (sets subclass), Frames per Multi-frame (sets K), Octets per frame (sets HD,F, and L in this device). By default, M will always be 2, CS will be 2, N will be 14 and N' will always be 16. I am checking with the design team regarding the other parameters but I think the answer will be no.

Regards,

Jim

0 jim s over 7 years ago in reply to jim s

TI__Guru* 91947 points

Fumio,

The design team has confirmed that these cannot be programmed.

Regards,

Jim

0 F.N over 7 years ago in reply to jim s

TI__Expert 8760 points

Hi Jim-san,

Thank you for your quick reply.
Your reply was very helpful.
Thank you!!

Best regards,
Fumio Nakano

Data converters

Data converters forum

ADS42JB49: ADJCNT,ADJDIR,BID,CF,CS,DID,F,HD,L,LID,M,N,M',PHADJ,S parameters