This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TSC2200: Software based queries

Part Number: TSC2200

TCS2200 is a programmable controller for touch screen and keypad. But  I have doubt on what is software to be used to sketch, compile and upload a program to this controller. In software and tool section there is no software is there. It contains a some kind of another file

  • Hi Praveen,

    Just to clarify, the TSC2200 does not have an internal microcontroller. There is a digital SPI interface that is used to program and read from the internal registers which configure the sampling rates, resolution, DAC output, etc. The register map is shown in Table IV of the datasheet. The SPI interface timing information can be seen on page 2 with additional information starting on page 12.