• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 249 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DDC114: Anti-aliasing Filter

ADC3444: i want to design one anti lasing filter for input section of adc3444

SUBRAMANI Hanumaiah
Prodigy 10 points
Other Parts Discussed in Thread: ADC3444, ADC34J44EVM

can you please suggest me on 60MHz antilasing filter design for adc3444

  • 0
    TI__Genius 12780 points

    Hi Subramani,

    The ADC34J44EVM design package shows this circuit for low pass (anti-aliasing) filtering using a fully differential amplifier (FDA) to drive the ADC analog inputs. I have run a simulation with TINA (free ti software) to show you some component values that might be close to what you want.

    Best Regards,

    Dan