ADS8588SEVM-PDK: REAL TIME CAPTURE

HI, 

i understand, if it possible can you refer me to another ti engineer who might now about  MCU or DSP board that have the same header J9 and can be interfaced with ADS throught that header? 

Hi monhamed,

You opened two threads for exactly same query about same device (http://e2e.ti.com/support/data-converters/f/73/p/867724/3212972#3212972). I haveanswered your same question in that thread, I do not know which microcontroller board has a connector to use J9 header, you may check on following forums. Another solution is, the part number of connector matching J9 connector on ADS8588SEVM board is QSH-030-01-L-D-A, you can make a controller board by yourself.

http://e2e.ti.com/support/microcontrollers/

http://e2e.ti.com/support/processors/f/791#pi321313=2

I will close both threads since have answered the questions from our side, thanks.

Regards,

Dale

HI 

i understand but i don't have the enough time to build the MCU, I have limited time to submit the project, so it will be great if you suggest to me a DSP board or a MCU or a FPGA board have the same QTH-030-01-L-D-A to connect .

monhamed,

I do not think we have any controller board with QTH-030-01-L-D-A connector except PHI card paired with ADS8588SEVM. I'm not the right person to support a controller, we are in different team and location, this is the reason why suggested you to check on microcontroller E2E forum.

Regards,

Dale

ok thank you , another thing  can you suggest me an ADS board that can be used for real time application and the raw data is accessible easily for coding  and has 8 simultaneously sampling channels?