ADS52J65EVM: Using ADS52J65EVM with TSW14J56EVM

Dimitrios Matakias

Part Number: ADS52J65EVM
Other Parts Discussed in Thread: ADS52J65

Hello,

I recently purchased the ADS52J65EVM and the TSW14J56EVM to evaluate the ADC performance.

However I encountered 2 issues during software installation. I downloaded the latest version of HSDC Pro (5.2). When I finished installation and connected the TSW14J56EVM it was detected successfully, however the ADS52J65 was not available to select in order to upload the appropriate firmware to the FPGA. I read on the ADS52J65 user manual that version 4.90 must be used, however it is not available online.

Moreover when I run the HMC DAQ gui I get the error "Error 1003 occured at Invoke Node in Startup Splash Screen.vi". This error seems to happen to many other users.

Regards,
Dimitrios Matakias

over 3 years ago

0 Praveen Aroul over 3 years ago

TI__Mastermind 49666 points

Hello Dimitrios,

I have uploaded HSDC Pro v4.9 to the secure software folder of ADS52J65 (http://www.ti.com/mysecuresoftware)

Please install the HSDC Pro GUI first and then install the ADS52J65 GUI. Follow the user guide appendix for installation instructions.

If you still run into the same issue, let me know.

0 Dimitrios Matakias over 3 years ago in reply to Praveen Aroul

Prodigy 20 points

Praveen Aroul said:

Hello Dimitrios,

I have uploaded HSDC Pro v4.9 to the secure software folder of ADS52J65 (http://www.ti.com/mysecuresoftware)

Please install the HSDC Pro GUI first and then install the ADS52J65 GUI. Follow the user guide appendix for installation instructions.

If you still run into the same issue, let me know.

Hello,

Thank you very much for uploading the HSDC Pro v4.9. It works well now.

Regards,
Dimitrios Matakias

Data converters

Data converters forum

ADS52J65EVM: Using ADS52J65EVM with TSW14J56EVM