Good morning,
I am currently an undergraduate student at the Democritus University of Thrace in Greece performing my dissertation thesis in the field of biomedicine. For this purpose, my colleagues and I, would like to develop a system of wearable sensors that will enable the continuous monitoring of vital biomedical parameters such as the body temperature, the blood pressure, the saturation of oxygen in blood, the hearth rhythm, as well as the electrocardiogram.
Based on past projects, I have in my disposal the products, but I do not know for sure if this is the appropriate for the conduction of the system as described above. To a greater level of detail, I have already the following products:
- ADS1293EVM
- TIVATM C SERIES TM4C123G LaunchPad Evaluation Kit EK-TM4C123GXL
- LMT70EVM (Temperature Sensor)
Through my navigation to your site of TEXAS INSTRUMENTS and having previously looked into various scientific papers, I did not manage to find exactly the appropriate equipment that I will need to fulfil my thesis. However, as I was looking into a technical document provided by your company named ‘’ MEDICAL APPLICATION GUIDE –SLYB108h’’ -, I noticed-in page 12 out of the 151- that there was a reference in an “Analog Front End” as indicated in the picture attached:
For this reason, as I have not yet managed to find an Analog Front End that it will be able to perform and support all the relevant functions and measurements at the same time, I would like your valuable guidance in terms of providing me the most appropriate Analog Front End that it will be able to support and monitor the required biomedical parameters that I have previously described(body temperature, the blood pressure, the saturation of oxygen in blood and ECG).
Kind RegardsExtracted pages from Medical Applications Guide-slyb108h.pdf
Sotiris Katsimentes