Texas Instruments (TI) Data converters support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search data converter IC content or ask technical support questions on everything from analog to digital converters (ADCs) and digital to analog converters (DACs) to high speed ADCs and special function data converters. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] "WARNING: You are connecting to an unrecognized EVM" Error Message

    I have received the following error message while connecting to an EVM... What does it mean?

  • [FAQ] ADS7883: How to get out of power down mode?

    Part Number: ADS7883 I want to use the power down capability of the ADS7883, but how does the device exit power down mode and return to normal operation?

  • [FAQ] ADS7883: Is there a minimum sampling rate or maximum idle time?

    Part Number: ADS7883 What is the minimum sampling rate that the ADS7883 device can support? Or, what is the maximum time the device can be left idle, not converting?

  • [FAQ] How do I resolve PAMB EVM connectivity and/or driver installation issues

    I got the following error message when running an EVM GUI, how do I resolve it? NOTE: The " SCB " and " PAMB " boards utilize the same USB drivers, so this information is equally applicable to the SCB-based EVMs...

  • [FAQ] ADS131A02: ADS131A02 Example Code

    Part Number: ADS131A02 Hello, Does TI offer example C code for the ADS131A04 ?

  • [FAQ] ADS131A04: ADS131A04 Example Code

    Part Number: ADS131A04 Hello, Does TI offer example C code for the ADS131A04?

  • [FAQ] ADS124S08: Is example code available to convert sensor output such as a thermistor, thermocouple or RTD to temperature?

    Part Number: ADS124S08 Other Parts Discussed in Thread: ADC-TEMP-SENSOR-FW , I want to measure temperature using an ADC, but I'm not sure which sensor I should use or how to go about making the measurement. A thermistor or RTD use resistance and a thermocouple…

  • [FAQ] ADS124S08: How do I measure temperature using an RTD?

    Part Number: ADS124S08 Other Parts Discussed in Thread: ADC-TEMP-SENSOR-FW , I want to make a temperature measurement using an RTD connected to an ADC. There 2-wire, 3-wire and 4-wire RTDs, can you explain the differences? Do you have information…

  • [FAQ] ADS124S08: How do I measure temperature using a thermocouple (TC)?

    Part Number: ADS124S08 Other Parts Discussed in Thread: ADC-TEMP-SENSOR-FW , I want to make a thermocouple temperature measurement using an ADC. Do you have information on how to make this type of measurement? And do you have any example code on how…

  • [FAQ] The relationship between SNR and ADC clock jitter

    Hi team, Why the clock jitter will affect the SNR of ADC? How to get the following equation?

View FAQ threads