Texas Instruments (TI) Data converters support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search data converter IC content or ask technical support questions on everything from analog to digital converters (ADCs) and digital to analog converters (DACs) to high speed ADCs and special function data converters. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] ADS124S08: When should I enable/disable the external reference buffers?

    Part Number: ADS124S08 I'm using a unipolar analog supply. If I make a ratiometric measurement where I use an external reference as an input (such as from an RTD reference resistor), should I enable the reference buffer for REFxN? What about REFxP?

  • [FAQ] ADS1258: ADS1258 and ADS1258-EP Thermal Information

    Part Number: ADS1258 The thermal information for the ADS1258 and ADS1258-EP is not in the datasheet. Is this information available?

  • [FAQ] Do the ADS129x EVMs work on current Windows operating systems?

    Other Parts Discussed in Thread: ADS1292 , ADS1293 Are the ADS129x EVMs compatible with Windows 8, Windows 10, and Windows 11? Are the device drivers digitally signed?

  • [FAQ] Where can I find additional training videos for ECG applications?

    Are there any training videos about ECG applications? If so, where can I find them?

  • [FAQ] Does TI have a reference design for monitoring personal multi-parameter bio-signals?

    Does TI have a reference design for monitoring personal multi-parameter bio-signals?

  • [FAQ] Does TI have a reference design for software pacemaker detection in ECG?

    Does TI have a reference design for software pacemaker detection in ECG?

  • [FAQ] Does TI have a reference design for hardware pacemaker detection in ECG?

    Does TI have a reference design for hardware pacemaker detection in ECG?

  • [FAQ] How is electrode contact impedance calculated using lead-off detection?

    How is electrode contact impedance calculated using lead-off detection?

  • [FAQ] Does TI have an application note that covers the theory behind lead-off detection?

    Does TI have an application note that covers the theory behind lead-off detection?

  • [FAQ] Does TI have an application note that covers how to improve common-mode rejection (remove 50/60Hz noise) using the right-leg drive amplifier (RLD)?

    Does TI have an application note that covers how to improve common-mode rejection (remove 50/60Hz noise) using the right-leg drive amplifier (RLD)?

View FAQ threads