This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
1. I would like to know, is there anyway to connect AFE7222evm with PC without any FPGA device,(using uPP )
2. Is there any way to connect MatLab Simulink direct to AFE7222EVM?
1) The uPP interface requires single ended CMOS signals whiles the AFE7222EVM was built to use differential signals from the LVDS connector. Connecting the two interfaces is therefore not possible.
2) There are drivers available in <HSDCPRO install directory>/HSDCPro Automation dll folder that can allow you to connect to Matlab but the AFE7222EVM needs to be connected to the TSW1400EVM.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.