• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 46 subscribers
  • Views 3582 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1299EEGFE-PDK: ADS1299 PDK Software Installation and Configuration on Windows 10

Aditya US
Prodigy 20 points
Part Number: ADS1299EEGFE-PDK
Other Parts Discussed in Thread: ADS1299,

Hi TI,
Recently i've purchased ADS 1299 Eval Board and trying to install software and drivers by disabling the Driver Enforcement in Windows 10 , i've succeeded in installing USBStyx Drivers but when it comes to VISA-USB Drivers MMB0 driver is getting failed even though i try with manual procedure using NI VISA Wizard or installing through MMB0 INF File , because of that Main Software is unable to identify the board and throwing an error namely "Download failed.. Reset the hardware.." 
Can anyone help me to configure the installation properly or if anyone has Win 10 compatible INF file for driver installation , please help me by posting it.

PFB snaps of the Device Manager and ADS1299 Software Main Window

 

Thanks
 

  • 0
    TI__Guru 59876 points

    Hi Aditya,

    Thank you for your post and welcome to our forum!

    I believe you may have pointed to the incorrect drivers.

    When you first apply power to the MMB0 and plug in the USB cable (before starting the software) you should see EVM enumerate as an MMB0 (NI-VISA) device:

    Next, after you start the ADS1299EEGFE-PDK software, the board should re-enumerate as a USBStyx device:

    Please try pointing to the same driver folders as I've shown above. It may be necessary to uninstall the software and start fresh. If you do, try installing as an Administrator. 

    Best Regards,

  • 0 in reply to Ryan Andrews
    Prodigy 20 points
    Hi Ryan Andrews,

    Thanks a lot for your detailed explanation, i've uninstalled previous drivers and installed again by disabling the Driver Enforcement with admin privileges, after few unsuccessful attempts i've acquired access to PDK and now it became functional.

    Once again thanks for your help
  • 0 in reply to Aditya US
    TI__Guru 59876 points
    Hi Aditya - I'm glad it worked!