This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: ADC12J1600EVM
Dear Support Team;
I'd like to connect ADC12J1600EVM and KC705.
Can I connect directly?
Yes but you can only use the ADC EVM in 2 or 4 lane mode as the KC705 only has 4 serdes lanes routed to the FMC connector.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to jim s:
Thank you for your quick reply.
And, I have 2 addtional questions.
1.Can ADC12J1600EVM connect KC705 directly?
2.If you know, which XILINX other board can connect ADC12J1600EVM directly?
In reply to Masaaki Sugiyama68:
This board should work with almost any Xilinx board that has an FMC or FMC+ connector and supports the JESD204B standard. We have tested this EVM with the following Xilinx platforms:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.