• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 278 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TINA/Spice/TINA-TI: how to open ibis models in tina -ti.?

DAC80504: TINA/Spice/TINA-TI: how to open ibis models in tina -ti. for DACx0504

ali djabbari1
Prodigy 100 points
Part Number: DAC80504
Other Parts Discussed in Thread: TINA-TI

TINA/Spice/TINA-TI: how to open ibis models in tina -ti. for DACx0504

  • 0
    TI__Mastermind 18856 points

    Hi,

    IBIS models cannot be used in TINA because TINA is a spice simulator. IBIS is Input output Buffer information which is used in signal integrity analysis of digital interface. You may need Cadence Sigrity or Hyperlynx to do the same.

    Regards,

    AK