DAC5311: Tina simulation of DAC5311

Shreenidhi Patil

Expert 3126 points

Part Number: DAC5311

Hello team ,

Can you please help me generate a ramp from 0 to 4V and 4V back to zero using the DAC5311 in tina

the image required is from the output of the DAC is shown below

I am not able to configure the data pattern generator to do so

Can you please help me get the above output

thank you so much for your help

DAC.TSC

over 7 years ago

0 Matthew Sauceda over 7 years ago

TI__Genius 11750 points

Hi Shree,

How's it going! Long time no chat :) I haven't simulated with this particular TINA model, but will try to see what I can accomplish with the software. I'll update this post with my results.

Best Regards,
Matt

0 Shreenidhi Patil over 7 years ago in reply to Matthew Sauceda

TI__Expert 3126 points

Hi matt ,

i am doing great

How are you

I am very thankful for your quick support

I am trying to model a complete battery charger solution for 15s Li ion battery pack for 1 of my customer

In that i was planing to use this DAC as way to set the CC and CV limits based on the digital inputs from the uC of my customer

Thank you so much for your help

Hope you are putting your HART in this ;)

0 Matthew Sauceda over 7 years ago in reply to Shreenidhi Patil

TI__Genius 11750 points

Howdy Shree,

It looks like the connections are incorrect to the pattern generator. You may also need to manually input the decrease in code from 0xFF-0x1FE for the pattern generator. The simulation box should then be adjusted to cover the full address span from Address 0 to Address 1FE (510).

Please let me know if you have any other questions.

Best Regards,

Matt

dac5311_shree.TSC

0 Shreenidhi Patil over 7 years ago in reply to Matthew Sauceda

TI__Expert 3126 points

Thanks a lot Sauce

Made it so much more easier to show demo to my customer in tina

Appreciate your effort ,

Data converters

Data converters forum

DAC5311: Tina simulation of DAC5311