• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 212 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS8028: SPI demo code required

Benjamin Zhou
Expert 4000 points
Part Number: ADS8028

Hi Team,

  My customer want to evaluate the ADS8028, and required for SPI configuration(software), could you kindly help to provide the DEMO source code which should include below items?

--ADS8028 configuration:  external 4.096V ref;  repeat mode;

--ADS8028 read operation;

Expect for your reply, thanks.

Best Regards

Benjamin

  • 0
    TI__Mastermind 24940 points

    Hello,

    Unfortunately we do not have any sample code.

    When developing code, we suggest using an oscilloscope to visually confirm that what the code is doing is as expected.

    Also, having the timing requirements available is always handy to make sure no violations occur.

    The reference used by default is the internal reference, the external reference is set by the control register bit, found on page 18 of the datasheet

    Regards

    Cynthia