This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HDMI Audio to I2S

Other Parts Discussed in Thread: DIR9001, DIX4192

Looking for a solution to convert the AUDIO signal carried by HDMI (output from a BluRay for example) to I2S to pass to a DAC chip. Can anyone point me in the right direction?

  • Hi, Kevin,

    Welcome to e2e, and thanks for your interest in our products.

    I believe HDMI transmits audio in S/PDIF format. If this is the case, then perhaps something like the DIR9001 could do the trick?

    Sorry, I am not very familiar with HDMI, we don't have any solutions in the audio group that directly interface to HDMI.

    Let us know what you find out!

    -d2
  • HDMI Receiver IC's will typically convert the embedded audio stream (usually encapsulated in IEC 60958 format). Most HDMI decoders will stream this content out as S/PDIF that can be converted to I2S using a DIR9001 or DIX4192.

    TI does not make HDMI reciever IC's that does that initial conversion.
  • Thank you both for your feedback.

    I'd rather not convert to S/PDIF then I2S, if I can help it. I suppose I'm on the hunt elsewhere for an HDMI Receiver / Decoder.

  • Kevin,

    The content over HDMI is traditionally very jittery, as Audio doesn't fit nicely into the video clocking structure.
    Other customers have had a lot of success using the "jitter cleaning" effects of a S/PDIF reciever to even out the jitter, therefor lowering THD in the following DAC.

    food for thought :)