ADS131E08EVM-PDK: I would like to receive the source code for the ADS131E08EVM-PDK

Matias Marchetti

Part Number: ADS131E08EVM-PDK
Other Parts Discussed in Thread: ADS131E08

Hi ti community...like i said I would like to receive the source code for the ADS131E08EVM-PDK, the LabVIEW source code , since I would like to do simple changes to do my measurements more easy and maybe implement other things. Also the DSP source would be great to help my to understand somethings.

Regards,

Matias Marchetti

over 6 years ago

0 Tom Hendrick over 6 years ago

TI__Guru**** 172646 points

Hi Matias,

Welcome to our e2e Forum! The firmware and source code for the ADS131E08 are located on an FTP server here:
ftp.ti.com/.../

Please note, these files are provided 'as is' and we would not be able to help you debug any changes you might make to the code.

0 Matias Marchetti over 6 years ago in reply to Tom Hendrick

Prodigy 30 points

HI Tomm thanks, that's what i'm looking for but can you send me the password of the .rar files (both)?. Thanks!

Regards

0 Tom Hendrick over 6 years ago in reply to Matias Marchetti

TI__Guru**** 172646 points

Hi Matias,

Sorry about the delay here, I sent the detail to you this morning.

0 Matias Marchetti over 6 years ago in reply to Tom Hendrick

Prodigy 30 points

Hi tom...sorry the delay tom but the password that you sended to me doesn't work it was something like txxxx75...I wrote you and email about this but it seems it gets lost...can you check if its ok or send me the correct password? Thanks!

0 Tom Hendrick over 6 years ago in reply to Matias Marchetti

TI__Guru**** 172646 points

Hi Matias,

I just sent you another note...

Data converters

Data converters forum

ADS131E08EVM-PDK: I would like to receive the source code for the ADS131E08EVM-PDK