Frequent Questions

  • [FAQ] USB Type-C Resources

    [Click here to return to the INT-TXP USB Homepage] Welcome to the USB Type-C E2E Page Listed below are a variety of resources to assist with the implementation USB Type-C! USB Type-C Training: USB Type-C handbook Demystifying the power and…

  • [FAQ] Interface USB: E2E Homepage

    Welcome to the Interface TXP-USB E2E Page Here you will find training/ design resources/ support for our USB devices. Select an icon below to find a relevant collection of FAQ's, Applications Notes, Training Videos and more! USB Type…

  • [FAQ] How to boot from dual boot media (OSPI NOR + eMMC) using MCU+SDK?

    Part Number: AM62P Other Parts Discussed in Thread: UNIFLASH Default MCU+SDK SBL examples only support booting from a single boot media (SBL OSPI/SBL EMMC), this FAQ demonstrates how to modify the SBL example to support booting from different boot medias…

  • [FAQ] TDA4VL-Q1: Steps to Build and Run PDK FreeRTOS Example Applications

    Part Number: TDA4VL-Q1 Hello Team, I am looking for guidance on how to build and run the PDK FreeRTOS example applications . Specifically, I would appreciate clarification on the following points: The correct steps to build the PDK FreeRTOS…

  • [FAQ] How to enable the DDR inline ECC in Linux SDK on AM62-SIP board

    Part Number: AM625 DDR ECC [1] on the TI AM62x SoC operates using an inline ECC mechanism. Unlike traditional server-grade systems that require a dedicated 9th memory chip, the AM62x stores Error Correction Code (ECC) data directly within the standard…

  • [FAQ] Linear vs. Limited Redriver

    Part Number: TUSB1002A Please use the links below to access our collateral regarding linear and limited redrivers: Linear vs. Limited Redriver Training Slides Linear vs. Limited redriver Training Video

  • [FAQ] TDA4AEN-Q1: How to enable 2 different csitx nodes on single instance from openvx application

    Part Number: TDA4AEN-Q1 Other Parts Discussed in Thread: SYSCONFIG The reason behind craeating 2 different nodes for csitx is to transmit frames with different format/resolution on the same csitx instance.

  • [FAQ] TDA4AEN-Q1: TDA4AEN-Q1 : How to configure GPIO1_52-71 (OLDI pins) interrupts on J722S EVM

    Part Number: TDA4AEN-Q1 Other Parts Discussed in Thread: SYSCONFIG , , UNIFLASH The J722S TRM incorrectly states that GPIO1_52 through GPIO1_71 do not support interrupt functionality. In reality, these pins do have interrupt capability but require…

  • [FAQ] MSPM0G3519: MSPM0 EEPROM Emulation Usage - Calculation on Space Utilization and Equivalent Endurance

    Part Number: MSPM0G3519 Important note - Please note we only discuss memory space utilization and equivalent endurance here for the comparison. FEE method is a nice method to enable a wider range of data size configuration, and support some special…

  • [FAQ] ESD321: ESD321DYA Pin Configuration

    Part Number: ESD321 Hi, ESD321DYA has the oppositie pin configuration than what is expected. Is Pin 2 supposed to be IO and Pin 1 supposed to be GND? Thanks

View FAQ threads