DLP Lightcrafter EVM - requesting Young Optics light engine technical data

Franco Cheli

Hello, I'm considering buying a DLP Lightcrafter EVM, but I can't find anywhere the technical sheets of the light module from Young Optics International. I will need those to see if the module can be modifide (ie. replacing the LEDs).

Please let me know if/where I can find those informations.

over 7 years ago

0 Vivek Thakur over 7 years ago

TI__Mastermind 23070 points

Hi Franco,
Welcome to DLP forum and thank you for your interest.

Could you please share which DLP EVM your considering to buy? It will also help if you share some details of the your intended application/use case.

regards,
Vivek

0 Franco Cheli over 7 years ago in reply to Vivek Thakur

Prodigy 30 points

I was thalking about this one: www.ti.com/.../DLPLIGHTCRAFTER
I will need to replace the LEDs with different wavelenghts and higher power ones, using external power supply. In other words, I would just need to keep the TIRF prism in it, if it was possible to remove it, and rebuild the whole optics module. Replacing the LEDs would be the easiest option tho.
Thank you.

0 Vivek Thakur over 7 years ago in reply to Franco Cheli

TI__Mastermind 23070 points

Hi Franco,
Please see the following thread :
e2e.ti.com/.../162664

This is could be helpful and answer your question.

The technical sheet on optical engine is Young Optics's proprietary information. We are not authorized to share.
regards,
Vivek.

0 Franco Cheli over 7 years ago in reply to Vivek Thakur

Prodigy 30 points

Thank you, this is really helpful!

DLP®︎ products

DLP products forum

DLP Lightcrafter EVM - requesting Young Optics light engine technical data