DLP3010: How should user make a target board for DLPC3478 and DLPA3000?

Hiroyasu Tazawa1

Guru 12350 points

Part Number: DLP3010
Other Parts Discussed in Thread: DLPA3000, DLPC3478

Hi,

Let me talk about DLPC3478 and DLPA3000.

I already talk on this thread.
e2e.ti.com/.../792121

I undestood it does not have reference design and
TI can provide firmware for DLPC3478 and DLPA3000.

I guess TI can not make a firmware for each customers.
But How should user make a target board for firmware TI provide ?

Best Regards
Hiroyasu

over 5 years ago

0 Kyle Rakos over 5 years ago

TI__Mastermind 20045 points

Hello Hiroyasu,

Are you asking how they actually design the schematic for the various configurations? It will be up to the customer to use the available reference designs and the appropriate IC datasheet. We can of course help with questions as they come up.

For the firmware this is something that is currently individually supplied. We are working towards getting this all available on ti.com; however, for now, individual posts with the requests is the best method.

Thanks,
Kyle

0 Hiroyasu Tazawa1 over 5 years ago in reply to Kyle Rakos

Guru 12350 points

Dear Kyle

Thank you for your reply.
I have a favor to ask you again.

Individual post means User should post to E2E ?
Is this customized firmware is free ??

Best Regards
Hiroyasu

0 Kyle Rakos over 5 years ago in reply to Hiroyasu Tazawa1

TI__Mastermind 20045 points

Hello Hiroyasu,

Whoever needs the software can post to E2E (you or another user). We do not charge for firmware.

Thanks,

Kyle

0 Hiroyasu Tazawa1 over 5 years ago in reply to Kyle Rakos

Guru 12350 points

Dear Kyle

Thank you !
I got it.

Best Regards
Hiroyasu

DLP®︎ products

DLP products forum

DLP3010: How should user make a target board for DLPC3478 and DLPA3000?