• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 27 subscribers
  • Views 292 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPDLCR3010EVM-G2: Read System Temperature

Anabela Riberio
Prodigy 40 points
Part Number: DLPDLCR3010EVM-G2
Other Parts Discussed in Thread: DLPC3430, DLPC3433, DLPC3432, DLPC3438, DLPC3435


Hello,

I am working with the DLPDLCR3010EVM-G2 evaluation board. I have a question about the I2C commands. In the programmer's guide for DLPC3430, DLPC3432, DLPC3433, DLPC3435 and DLPC3438 drivers(https://www.ti.com/lit/ug/dlpu020d/dlpu020d.pdf?ts=1612461138011), the Read system temperature (0xD6) command is never mentioned. However, in the LigCragter Display DLP API does this command appear in the EVM information section? Is it possible to use this command?

Thanks,

Anabela RIbeiro