DLPDLCR3310EVM: Motor driver evaluation module

user6547544

Part Number: DLPDLCR3310EVM

Hello,

I'm developing android pico projector software by using DLPDLCR3310EVM. I would like to get motor driver evaluation module works on android via USB or I2C. I will plug it to our android main unit and adjust lens focus of DLPDLCR3310EVM. Where can I buy it? Please give me advice. Thank you.

over 3 years ago

+1 Philippe Dollo over 3 years ago

TI__Mastermind 28005 points

User,

Thanks for your interest in our DLP technology.

Do you intend to use an external motor that is controlled via the Android OS? If so, then any device which is compatible which you have the necessary driver code for should work.

What sort of specifications are you looking for?

Regards,

Philippe Dollo

+1 user6547544 over 3 years ago in reply to Philippe Dollo

Prodigy 10 points

Hi Dollo,

Thank you for your reply. You are right. I will use Android OS and I'm looking for complete hardware solution for DLPDLCR3310EVM. Are there any evaluation kits already assembled?

0 Philippe Dollo over 3 years ago in reply to user6547544

TI__Mastermind 28005 points

User,

The only solution for the DLPDLCR3310EVM available is the EVM itself. If you want to design a board that has an Android SoC built in, you will probably want to leverage the reference design associated with it to add your own frontend (and motor driver as appropriate): https://www.ti.com/tool/TIDA-080000

I hope this helps.
Regards,

Philippe Dollo

DLP®︎ products

DLP products forum

DLPDLCR3310EVM: Motor driver evaluation module