Other Parts Discussed in Thread: DLP2000, DLPC2607,
Dear Forum,
Ia am having a harrd time getting a response when accessing the DLP2000 evm from my Rpi3, "Raspberry Pi". Ihave used I2cset and I2cget to interact with the EVM.
I2cdetect identifies the 0x1b for the 2607 and 0x57 for the EEprom. Reading from any of the preset registers returns 00 in all cases. Have tried to activate any of the test images, using reg 0x11 for test pattern generation, with no result, my commands were:
i2cset -y 1 0x1b 0x11 0x3 i # This should show a green screen
No change!!1
Has anybody been succesful with using an Rpi3 with the eval module?
Thanks for your assistance
regards
Samir Lehaff