HD3SS214: ZXH and ZQE B2B

Mike Yu

Part Number: HD3SS214

Hi Team,

Due to ZQE package is going to EOL, I saw the post below said that ZXH and ZQE are P2P. Just want to confirm that are they B2B? The customer didn't need to change any design on their schematic and layout, right? Thank you.

(+) HD3SS214: package issue - Interface forum - Interface - TI E2E support forums

Best regards,

Mike

over 4 years ago

0 David (ASIC) Liu over 4 years ago

TI__Guru**** 177476 points

Mike

Please refer to this app note, https://www.ti.com/lit/ug/sllz077/sllz077.pdf.

Thanks

David

0 Mike Yu over 4 years ago in reply to David (ASIC) Liu

TI__Intellectual 2320 points

Hi David,

Thanks for sharing the app note, since it just a package change. The device between ZXH and ZQE should be BOM to BOM. Thank you.

Best regards,

Mike

0 David (ASIC) Liu over 4 years ago in reply to Mike Yu

TI__Guru**** 177476 points

Mike

Please make sure they take a look at the nfBGA packaging application report as well, https://www.ti.com/lit/an/spraa99c/spraa99c.pdf?ts=1621472417062.

Thanks

David

0 Mike Yu over 4 years ago in reply to David (ASIC) Liu

TI__Intellectual 2320 points

Hi David,

Get it, I will share with the customer. Thank you.

Best regards,

Mike