TUSB212-Q1: Android auto certification test

Hi Malik,

Thanks for your kind response. Do you know TUSB216-Q1 RTM plan?

Hi,

Unfortunately I cannot share specific details here.

Hi Malik,

Okay, I got it. My customer is verifying TUSB216 through the level(0 to 3) setting of TUSB216. I will let you know the test result once I get the information from them.

Regards,

Hi,

Can you share the test setup here? 

Hi Malik,

Their test setup is all Rboost resistor setup(0ohm, 1.8kohm, 3.6kohm, DNI). They will apply the confirmed Rboost resistor if the improvement is confirmed through tuning of Rboost resistors. I will let you know after that.

Regards,

Sounds good please let me know. 

Hi Malik,

Do you know the exact dc boost level of TUSB216 like the dc boost level of TUSB212 such as 40mV low, 60mV mid, and 80mV high dc boost? There is no information about it in the datasheet, please share it with me if you have any information or data.

Regards,

Hi Malik,

My customer has completed the verification of TUSB216. There was no problem under condition of DC_BOOST level 1 on their test method, even though the verification under condition of vehicle system was not completed. So they are trying to apply this device on their end product, but they are in trouble with their OEM due to the non-automotive qualified issue.

Regards,

Hi Jeffery,

Do you need additional TI support here? 

Hi Malik,

This case seems to be closed. Let me post it as a new case if I need the additional your support.

Regards,