MIPI to DP bridge IC.

Yong Seon Choi

Hi Teams,

I have some questions for MIPI to DP bridge IC.

Do you have the IC support QHD , 120fps, 10bit ?

0 David (ASIC) Liu over 4 years ago

Hi,

Would DSI86 be a fit for your application?

Thanks

David

0 Yong Seon Choi over 4 years ago in reply to David (ASIC) Liu

DSI86 is fully supported with resolution an fps?

0 David (ASIC) Liu over 4 years ago in reply to Yong Seon Choi

Hi,

Stream bit rate = pixel clock * bpp = 483.12 * 30 = 14493.6

Min DSI clock = stream bit rate / 2 * DSI lanes, assumes 8 DSI lanes, Min DSI clock = 905.85MHz

Unfortunately this resolution is outside the DSI86 DSI clock (max 750MHz) support range.

Thanks

David

+1 Yong Seon Choi over 3 years ago in reply to David (ASIC) Liu

Thank you for your comments.

Any solution for converter ic supporting QHD@120, 10bit ? DP or HDMI?

0 David (ASIC) Liu over 3 years ago in reply to Yong Seon Choi

Hi,

Unfortunately we do not have a device that can support higher bandwidth.

Thanks

David

Interface forum