• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 203 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DS25BR204: Output termination and power down

DS25BR440: Compliance and Terminations

Myles Hebert
Prodigy 10 points
Part Number: DS25BR440
Other Parts Discussed in Thread: DS25BR204,

Two questions:

  1. Is the DS25BR440TSQ/NOPB compliant with the TIA/EIA-644-A LVDS Standard?
  2. Another E2E post recommends inputs on the similar DS25BR204 are terminated with 100 Ohm resistors, even though there are some internally.  Is the same true for this part?

Thanks,

Myles

  • 0
    TI__Guru* 93670 points

    Hi Myles,

    1). DS25BR440 has not been validated against LVDS standard. Therefor we cannot claim compatibility to this standard.

    2). This is a good design practice to gnd un-used inputs. It is possible, you may not see an issue with un-terminated inputs but having termination on the un-used inputs provide a more deterministic performance.

    Regards,Nasser