SN55LVDS31: Unused Pins

Patrick Schexnayder

Part Number: SN55LVDS31

I’m not seeing any information on what should be done to terminate the unused input/output pins. Could you please advise?

over 4 years ago

+1 Clemens Ladisch over 4 years ago

Guru 325840 points

Unused outputs can be left open.

The A inputs have internal pull-down resistors and can be left open. The G and /G inputs must be connected to VCC or GND to prevent them from floating.

+1 Malik Barton57 over 4 years ago in reply to Clemens Ladisch

TI__Guru 64326 points

Unused inputs/outputs can be left open. Control pins should not be left floating.

Interface

Interface forum

SN55LVDS31: Unused Pins