DP83848I: Device Driver Update

Soumya Bhat

Part Number: DP83848I

Hi,

Currently we are using LXT908 chip from Intel for 10base2 application. We are doing feasibility test using DP83848I but we are not able to ping over 10Base2. Does any device driver update required for DP83848I part?

Regards,

Soumya

over 3 years ago

0 Gokul Koraganji over 3 years ago

TI__Mastermind 19250 points

Hi Soumya,

DP83848I doesn't support 10Base2. Please find our previous discussion here https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1094664/dp83848i-collision-detect-signal

--
Regards,
Gokul.

0 Soumya Bhat over 3 years ago

Prodigy 50 points

Hi Gokul,

Thank you for the quick reply. But if we use DP83848I for 100BaseT application, will it call for any driver software update?

Regards,

Soumya

0 Gokul Koraganji over 3 years ago in reply to Soumya Bhat

TI__Mastermind 19250 points

Hi Soumya,

Can you please let me know by what you mean software update? This is software update on the controller/host?

--
Regards,
Gokul.

0 Soumya Bhat over 3 years ago in reply to Gokul Koraganji

Prodigy 50 points

Hi Gokul,

Yes device driver update at controller side.

Regards,

Soumya

0 Gokul Koraganji over 3 years ago in reply to Soumya Bhat

TI__Mastermind 19250 points

Hi Soumya,

I guess the controller will be different for 10Base2 MACs and 100Base-Tx MACs.

--
Regards,
Gokul.

Interface

Interface forum

DP83848I: Device Driver Update